Come See Rugged Ridge at The 2012 Off-Road Expo

Visit Omix-ADA/Rugged Ridge at this year’s Lucas Oil Off-Road Expo powered by General Tire! Check out some of our newest products and promotions! The show is held in Pomona, CA from October 6th through the 7th. Find us at Booth# 4719 in Building# 4.

The expo offers you the greatest collection of off-road companies, parts, equipment, gear, and experts ever assembled in America. From off-road racing to rock crawling, trail riding to sand sports, to motorcycles and ATV’s, to camping and adventure travel, you have the unique opportunity to meet and talk with the most knowledgeable people in the off-road industry. With a full weekend of excitement and 10 acres of off-road vendors in one location, you will see everything that is going on in the dynamic world of off-road.

Crush Recovery Build: Rugged Ridge Aluminum XHD Bumpers


Finally got the Rugged Ridge Aluminum XHD front and rear bumpers installed, along with the tire carrier, and winch as well. The build is really starting to come together and is looking more and more like the rendering every day!

Crush Recovery Build: Rhino Lined Interior

Took Crush Recovery to

Rhino Linings Unlimited to have the entire interior floor Rhino Lined. Rhino Lining offers better protection and is more rugged than the stock carpet. I stripped out all of the carpet myself, and prepped everything for them to do the lining job. Check out the before and after!

 

Crush Recovery Build: JK Exhaust and Receiver Hitch Install

Today I’ve installed the exhaust and receiver hitch, both from Rugged Ridge. No issues with the install process on either part, but removing the factory exhaust… well, that’s another story. One of the hangers on the muffler seemed to be really seized up, so I had to resort to cutting it to remove it, which you’ll see in the photos. The new exhaust definitely gives a good power increase, and has a nice sound from the dual exit exhaust.

 

 

Crush Recovery Build: Wheels and Tires

In the past I’ve run 40″ and up sized tires, but this time around decided to go with something a little less aggressive in size. I chose to go with 37″ Nitto Trail Grapplers, they have great reviews for off road and on road use. They are extremely capable off road, but still give a nice and quiet ride on the road.

I’ve mounted the tires on a set of 17×9 Rugged Ridge Satin Black Alloy JK Wheels. These wheels have a great design, and Rugged Ridge also offers trim rings to help protect the wheels. I’ve matched the trim rings to the color of the Jeep. Check out the before and after pics below:

Crush Recovery Build: Tail Lights and Euro Guards

The last update was pretty hefty, so from now on I’ll try to update with one part of the build at a time. This next part of the exterior changes includes upgrading the tail lights and adding some tail light euro guards. I’ve swapped out the stock tail lights with some Bermuda Black LED lights from IPCW. LED’s are great because they are much brighter and last longer than normal lights, and these also look awesome with the black finish!

Now on to the Rugged Ridge Tail Light Euro Guards. These are great accessories for tail light protection and they look really good too. They fit on stock lights and same size aftermarket lights, like the IPCW LED’s I’ve installed. They’re also offered in a stainless/chrome finish.

Everything was very easy to install, more or less just a few screws and I was done!